Programming instructions

BASIC CO LINE PROGRAMMING TASKS DX-120 Programming Manual

- 144 -

Setting CO Line Time Switching via the DET (continued)

Continue programming as required:

10) Press the Hold button to return to the previous menu level.

Press the volume UP button to return to the DB Item Selection screen.

Exit programming (see “Exiting Database Administration” on page 27).

Setting the Pre-Defined Call Forward No Answer

The Pre-Defined Call Forward No Answer feature allows you to control where the system forwards a call on a CO line

when an extension does not answer.

You may want the system to forward these calls to the attendant extension, a

departmental secretary, another department, etc.

This feature is CO line specific; that is, the system forwards all

unanswered calls on a CO line.

NOTE

If you only want to forward unanswered calls for specific extensions, set that up in the

individual extension’s programming.

HINT

Also see “Setting Predefined Call Forward Time” on page 282.

SETTING THE PRE-DEFINED CALL FORWARD NO ANSWER VIA PC-DBA

From the PC-DBA main screen:

1) Go to ProgrammingXC. O. Line to display the C. O. Line screen.

Setting the Pre-Defined Call Forward No Answer via PC-DBA (continued on next page)