Programming instructions

- 133 -
DX-120 Programming Manual BASIC CO LINE PROGRAMMING TASKS
Enabling Privacy Release via PC-DBA (continued)
4) Click the Update button to store the settings into the database on the local disk.
• Use the procedure shown above to set the privacy release for other C.O. lines.
When you are finished:
5) Click the Close button to exit the current screen and return to the PC-DBA main screen.
6) Perform a SEND to copy the database changes to the DX-120 switch system memory.
ENABLING PRIVACY RELEASE VIA THE DET
NOTE
• chg, bksp, save, one, always, del, and ack are interactive LCD button operations.
Use the three buttons below the LCD display to activate the associated operation.
• You can press Hold at any time to return to the previous level or press the volume
buttons to return to the main DB selection screen.
1) Enter Database Administration (see page 26) using the feature code Feature # * to display the password
prompt.
2) Enter the DB Admin password (see page 27).
3) Enter 02-XXX-12 (where XXX is the CO line directory number: 800-839).
4) Press save to advance to the Privacy Release programming for the CO line you specified.
5) Press chg to select Yes or No.
• The default setting is No.
6) Press the Hold button to return to the previous menu level.
OR
Press the volume UP button to return to the DB Item Selection screen.
OR
Exit programming (see “Exiting Database Administration” on page 27).