Programming instructions

- 127 -
DX-120 Programming Manual BASIC CO LINE PROGRAMMING TASKS
Setting the CO Line Type (continued)
SETTING THE CO LINE TYPE VIA PC-DBA
From the PC-DBA main screen:
1) Go to ProgrammingXC. O. Line to display the C. O. Line screen.
2) Select the central office line you wish to assign.
• Available entries are 800 through 839.
• Entries 840 to 843 are for future use only.
3) Select the dialing mode you want to set (Tone or Pulse).
• The default is Tone.
Setting the CO Line Type via PC-DBA (continued on next page)