Programming instructions

BASIC CO LINE PROGRAMMING TASKS DX-120 Programming Manual
- 118 -
Assigning the Tenant Group (continued)
ASSIGNING THE TENANT GROUP VIA THE DET
NOTE
• chg, bksp, save, one, always, del, and ack are interactive LCD button operations.
Use the three buttons below the LCD display to activate the associated operation.
• You can press Hold at any time to return to the previous level or press the volume
buttons to return to the main DB selection screen.
1) Enter Database Administration (see page 26) using the feature code Feature # * to display the password
prompt.
2) Enter the DB Admin password (see page 27).
3) Press show to display the DB Item Select screen.
4) Enter 02-XXX-02 (where XXX is the CO line directory number: 800-839).
5) Press save to display the Tenant Group selection for the CO line you specified.
6) Press chg until the tenant group you want to use for this CO line appears.
7) Press the Hold button to enter a new CO line to program.
8) Press the Hold button to return to the previous menu level.
OR
Press the volume UP button to return to the DB Item Selection screen.
OR
Exit programming (see “Exiting Database Administration” on page 27).