Programming instructions

- 99 -
DX-120 Programming Manual BASIC SYSTEM PROGRAMMING TASKS
Selecting SMDR Transmit Rate (continued)
SPECIFYING SMDR TRANSMIT RATE VIA PC-DBA
From the PC-DBA main screen:
1) Go to ProgrammingXSystem ResourceXModem and Serial Port to display the Modem and Serial Port
screen.
2) Select the SMDR data transmission rate in the CIL field.
• Valid choices include 1200, 2400, 4800, 9800, and 19200.
• The default is 9600.
When you are finished:
3) Click the Update button to store the settings into the database on the local disk.
4) Click the Close button to exit the current screen and return to the PC-DBA main screen.
When you have finished all programming changes:
5) Perform a SEND to copy your new database to the DX-120 switch system memory.
Specifying SMDR Transmit Rate (continued on next page)