Programming instructions

- 95 -
DX-120 Programming Manual BASIC SYSTEM PROGRAMMING TASKS
Specifying PC-DBA Transmit Rate
The DX-120 system allows you to remotely program the DX-120 using PC-DBA on a laptop. You must set the
transmission rate for this communication between the switch and your laptop.
SPECIFYING PC-DBA TRANSMIT RATE VIA PC-DBA
From the PC-DBA main screen:
1) Go to ProgrammingXSystem ResourceXModem and Serial Port to display the Modem and Serial Port
screen.
2) Select the appropriate transmit rate (i.e., baud rate) in the RMT field.
• Valid selections are
- 1200
- 2400
- 4800
- 9600 (the default)
- 19200
When you are finished:
3) Click the Update button to store the settings into the database on the local disk.
4) Click the Close button to exit the current screen and return to the PC-DBA main screen.
When you have finished all programming changes:
5) Perform a SEND to copy your new database to the DX-120 switch system memory.
Specifying PC-DBA Transmit Rate (continued on next page)