Programming instructions

BASIC SYSTEM PROGRAMMING TASKS DX-120 Programming Manual
- 92 -
PROGRAMMING USING THE DET
NOTE
• chg, bksp, save, one, always, del, and ack are interactive LCD button operations.
Use the three buttons below the LCD display to activate the associated operation.
• You can press Hold at any time to return to the previous level or press the volume
buttons to return to the main DB selection screen.
1) Enter Database Administration (see page 26) using the feature code Feature # * to display the password
prompt.
2) Enter the DB Admin password (see page 27).
3) Press show to display the DB Item Select screen.
4) Enter 04-14-01-01 to program the owner of DSS Console #1.
5) Press save to display the current programming of the DSS Console #1 owner.
To change the designated DSS console owner press chg
6) Enter the extension number to be assigned as the DSS Console owner.
NOTE
Only valid (equipment installed) extension directory numbers can be assigned as
DSS Console Owners.
7) Press save to store the settings.
8) Press next to display the current directory of the DSS Console (e.g., “NULL” if empty).
9) Press chg to enter the new DSS Console directory number (the extension number of the digital port to
which the DSS Console is connected).
10) Press save to store the settings.
11) Press next to display a prompt for the next DSS Console # to be programmed.
• Valid entries are 1-12.
12) Enter the number of the next DSS Console to program.
OR
Press the Hold button to return to the previous programming menu for other programming requirements.
OR
13) Press the SPK button twice to exit programming mode.