Programming instructions

DXP Plus Programming instructions
lMl66-123
10.2. I
Manual ReDorts
Description:
Use the following programming procedure to manually command a printout to occur.
Programming:
1. Press CONTROL T for main menu.
2. From main menu, select printouts and press ENTER.
3. From printouts menu, select SMDAISMDR and press ENTER,
4. From SMDABMDR menu, select SMDA reports and press ENTER.
5. From SMDA reports menu, select desired report and press ENTER.
6. Press ESCAPE to end.
10.2.2 Aufomafic ReDor&
Description:
Program the system to automatically provide call cost reports for printing.
- Choose the day and time that the printout is desired.
- Choose the type and detail of each report.
- Dictate whether the call records are to be erased from the system memory
after they are printed.
Programming: 1. Press CONTROL T for main menu.
2. From the main menu, select SMDAISMDR and press ENTER.
3. From the SMDAKMDR menu, select automatic reports and press ENTER.
4. Type row number to select desired report and press ENTER.
5. Press SPACE bar for desired setting or type report print time in 24-hour format
(as directed by menu prompt) and press ENTER.
6. Repeat steps 4 and 5 for all desired reports and press ENTER.
7. When finished, press ESCAPE twice.
8. Type y to accept changes, n to reject them, or r to resume editing and press ENTER.
Call Costing and SMDNSMDR Programming 19-9