Specifications

Chapter 2 - Product Installation
T A B L E 2 3 TH E FI L T E R M A N A G E M E N T P A R A M E T E R S
Parameter Description
Filter Type
Selection
Select the IP filter to be viewed
IP Filter Set
Index
Select the IP filter set to be modified
Interface Select the interface to be modified. PV0~PV7 and WAN
interfaces.
Direction Select which direction of data flow to apply to the filters.
IP Filter Rule
Index
Select IP filter rule index to be modified.
Active Toggle this rule index ON or OF with Yes or No.
Source IP
Address
Enter the source IP address to deny access to the W300 router.
Subnet Mask Enter the subnet mask of the source IP address.
Port Number Enter the port number of the source IP address. 0 means that all
ports are allowed.
Destination IP
Address
Enter the destination IP address to deny access to the W300
router.
Subnet Mask Enter the subnet mask of the destination IP address.
Port Number Enter the port number of the destination IP address. 0 means
that all ports are allowed.
Protocol Select the protocol to filter.
Rule Unmatched Select what happens to the data in question if the rule currently
editing is unmatched. Next means that the data is then
compared to the next IP filter rule. Forward means that the data
will be allowed into the user system.
Click SAVE to submit the changes, or DELETE to delete the rule with the
parameters, or CANCEL to exit without saving.
UPnP Management
Universal Plug and Play (UPnP) is an open networking standard that uses
TCP/IP for simple peer-to-peer network connectivity between devices. An
Proprietary Information of ZTE CORPORATION 41