Specifications

 

CE27 Main Screen (Scrolled Right)
TX Pwr
:
[
Transmier Power Output Selection
]
Thisparameterselects the desiredpower output
fromtheVXR-7000 on the currentchannel. The
availablevaluesareHIGHandLOW.
Double-clickthelemousebuontoselect“Hi”or
“Lo”.
TOT Mute
:
[
Enable/disable the TOT beep monitoring
]
Double-clickthelemousebuontotoggletheTOT
Mutefeatureselects“on”or“o”.Whenthisparam-
eteris setto“on”, thealert beepwill sound from
thefrontpanelspeakerbeforetherepeaterturnsit-
selfo.
Rpt Use
:
[
Enable/disable the TOT while operating in the repeater mode
]
Double-clickthelemousebuontotoggletheRe-
peaterTOT(Time-OutTimer)selects“yes”or“no”.
The TOTtime is determinedvia dealer program-
ming.
TOT Beep
:
[
Enable/disable the TOT beep Transmission
]
Double-clickthelemousebuontotoggletheTOT
beep selects “yes”or “no”. When this parameter is
setto“yes”,thealertbeepwillbesentoutontheair
beforetherepeaterturnsitselfo,whileoperatingin
the“”mode.

RPT HT
:
[
Enable/disable the Repeater Hang-on Timer
]
Double-clickthelemousebuontotoggletheRe-
peater Hang-on Timer selectsyes”or “no”. When
this parameteris set to “yes”, the repeater will re-
main keyedfor adesired seconds after a receiving
carrierisdropped.
TheHang-up timeisdeterminedvia dealer pro-
gramming.
RPT GT
:
[
Enable/disable the Repeater Guard
]
Double-clickthelemousebuontotoggletheRe-
peater Guardfeatureselects “yes” or no. When
thisparameterissetto“yes”,thetransmierinhibit
fewsecondbeforetherepeaterisunkeyed.
Theinhibittime isdetermined viadealer program-
ming.