Specifications


DDec Type
:
[
DCS Decoder Type
]
This commandselects the mannerin which DCSis
tobedecoded.
Fixed= Decodesonlythe typeselectedinabove
parameter (DCS Typ: Normal orInvert-
ed).
Auto= Bothtypes(NormalandInverted)willbe
decoded.
Double-click thele mousebuon to selectthe de-
siredDCSDecoderMode.
Multi Tone
:
[
Enable/disable Multi Tone Operation
]
Double-click the left mouse button to display the
“”window.
Double-click the left mouse button on the “Multi
ToneEnable”totoggletheMultiToneOperationbe-
tweenselections“yes(“ ”)”and“no(“ ”)”.Click
the left mouse button on theappropriate field to
openthe“DropDownList”.Nowselectthedesired
CTCSStoneorDCScode.Youmaysetasmanyas16
CTCSStonesand/orDCScodes.

CWID ANI/ENI
:
[
Select the Identier mode
]
Double-clickthele mousebuontotoggle these-
lections“CWID”,“ANI/ENI”,or“o”.Toselectthis
featuretothe“CWID”or“ANI/ENI”,the“CWID”
parametermustbeenabledviathedealerprogram-
ming.
Action Mode
:
[
Select the repeater operation mode
]
Double-clickthelemousebuontotogglebetween
“Duplex”operationor“Simplex”operation.
Tx Freq.
:Edit Transmit Frequency
Usethe
[
0
]
-
[
9
]
keystoenterthedesiredchannelfre-
quencydirectly,andpressthe
[
eNter
]
key.
CTCSS Encoders
:
[
Toggle CTCSS Encoder ON/OFF, sets CTCSS Frequency
]
Double-click the left mouse
button to display the “
”window,click the
lemousebuononthede-
siredtone,thenclickthele
mouse button onthe
[
OK
]

switchtoaccepttheselected
tone.
DCS Encoders
:
[
Toggle DCS Encoder ON/OFF, sets DCS Code #
]
D o u b l e - c l i c k t h e
left mouse buttonto
display the“
” window, click
the le mouse buon
on the desired DCS
code, then click the
left mouse button on
the
[
OK
]
switchtoac-
cepttheselectedcode.
Base TOT
:
[
Enable/disable the TOT while in the “BASE” station mode
]
Double-clickthelemousebuontotoggletheTOT
(Time-Out Timer) feature selects “yes” and “no”.
The TOTtime is determinedvia dealer program-
ming.
Base Guard
:
[
Enable/disable the Base Guard Feature
]
Double-clickthelemousebuontotoggletheBase
Guard featureselects“yes”and “no”. When this
parameterissetto“yes”,thetransmierwillbein-
hibitedforafewsecondsbeforetherepeater(inthe
“”stationmode)turnstoreceive.
Theinhibittime isdetermined viadealer program-
ming.
LOUT
:
[
Select the Lock Out Feature’s mode
]
Double-clickthelemousebuontotoggletheLock
OutFeaturebetween“BCLO”,“BTLO”,or“o”.
”BCLO” inhibits transmiing while there iscarrier
present.“BTLO”inhibitstransmiingwhilethereis
carrierpresentunlesstherealsoisavalidtonepres-
ent.
