Specifications

VXA-150 P
RO
V
O
PERA
TING
M
ANUAL
31
MENU
(
“SET”
)
MODE
MENU Listing
A listing of the Menu items available via the SET
mode may be found below.
Menu
Item
SQL
MCLR
RESM
SCNL
BEEP
RSAV
LAMP
SFT
PRTM
DWMD
POBP
LCD
IMIC
Function
Squelch Level Setting
Memory Channel Clear
Scan-Resume Mode Setting
Scan Lamp On/Off
Keypad Beeper On/Off
Receiver Battery Saver
LCD and Keypad Illumination Mode
CPU Clock Shift
Priority Checking Time
Select the
Dual Watch/Priority Function
Select the Power on Beep
Select the LCD Display Readout
Internal Microphone On/Off
Available
Values
0 ~ 8
–
CAR/5
on/oFF
on/oFF
oFF/ABS/
1:1 ~ 1:5
KEY/TGL/5
on/oFF
05/10/15/
20/25/30
DW/PRI
1/2/3/oFF
NOR/INV
on/oFF
Default
2
–
CAR
on
on
1:1
KEY
oFF
15
(
1.5 sec
)
DW
1
NOR
oFF
SQL
Function: Squelch Level Setting
Available Values: 0 ~ 8
Default Setting: 2
Select a setting for this Menu item which just si-
lences the receiver when no signal is present. Use
the lowest setting which will keep the receiver quiet
between incoming transmissions.
MCLR
Function: Memory Channel Clear
To Clear a Memory channel:
1. Select the Menu Item MCLR.
2. Press the CHANNEL selector knob, then rotate
the CHANNEL selector knob to recall the
memory channel to be erased (“SET xx” will ap-
pear on the display).
3. Press the CHANNEL selector knob, then turn
the CHANNEL selector knob one click to change
the display to “CLR xx”.
4. Press and hold the CHANNEL selector knob for
2 seconds to exit.
Important Notice: An “erased” channel cannot be
restored, and “CH
-
001” cannot be erased, as it is
used for “Priority Channel” operation.