Specifications

VXA-150 P
RO
V
O
PERA
TING
M
ANUAL
14
To set 118.275 MHz, you do not need to press
the final “5” in the frequency:
[
1
]
à
[
1
]
à
[
8
]
à
[
2
]
à
[
7
]
.
r You may also turn
the top panel’s
CHANNEL selector
knob to choose the
desired operating fre-
quency. The channel
frequency will ap-
pear on the LCD.
r To change frequency
in 1 MHz steps, press
the
[
F
]
key momen-
tarily, then rotate the
CHANNEL selector
knob to select the
MHz digit desired.
Press
[
F
]
once more to resume normal channel
selection in 25-kHz steps.
OPERATION
r Rotate the VOL-
UME knob to set the
volume level. If no
signal is present,
press and hold the
MONITOR switch
for 2 seconds; back-
ground noise will
now be heard, and
you may use this
noise to set the VOL-
UME knob for the
desired audio level.
Press the MONITOR
switch momentarily again to silence the noise and
resume normal (quiet) monitoring.
r Press and hold the
LAMP switch for 2
seconds, to illumi-
nate the display and
keypad continuously.
To disable the illumi-
nation, press the
LAMP switch momentarily.
+
C
C