Service manual

5-3
Alignment
Transmitter Output Power
The following transmitter parameters can be ad-
justed from the computer by utilizing the Alignment
Software. Refer to the onboard help of the Alignment
Software Manual for details.
U Select the high band edge frequency channel
(CH4), and select the “high” power output level.
Key the transmitter and adjust “TX PWR Hi“ for a
power output of 70 Watts (± 2.0 W) as indicated
on the wattmeter.
U Select the band center frequency channel (CH3),
and select the “high” power output level.
Key the transmitter and adjust “TX PWR Hi“ for a
power output of 70 Watts (± 2.0 W) as indicated
on the wattmeter.
U Select the low band edge frequency channel
(CH1), and select the “high” power output level.
Key the transmitter and adjust “TX PWR Hi“ for a
power output of 70 Watts (± 2.0 W) as indicated
on the wattmeter.
U Select the band center frequency channel (CH3),
and select the “low” power output level.
Key the transmitter and adjust “TX PWR L3“ for a
power level of 30 Watts (± 1.0 W) as indicated on
the wattmeter.
TC1001TP1010T1006
T1005 T1011