Operation Manual

VX-450 SerieS Operating Manual
31
code set
(
Vx-454 & Vx-459 only
)
r
Press (or press and hold) the assigned program-
mable key to change the 5-Tone encoding digit.
To change the tones, select the desired digit using
the
[
A
]
/
[
B
]
keys, then change the number using
the
SIDE-1
/
SIDE-2
keys.
r
Press the
[
D
]
key to store the new setting. The
display indicates “
- SET -
” briey, then reverts to
the normal channel indication.
You may cancel the new setting by pressing the
[
C
]
key. In this case, the display indicates “
- CANCEL -
”
briey.
In the
VX-459
, you may enter the 5-Tone encoding
code directly from the 16-Button DTMF keypad (
[
0
]
- [
9
]
) and
[

]
key (wild card).
adVanced operatIon
speed dIal
(
Vx-454 & Vx-459 only
)
Your Dealer may have pre-programmed Auto-Dial
telephone number memories into your radio.
To dial a number, press the
[
A
]
/
[
B
]
key to select the
Auto-Dial memory number list provided by your
Dealer or Network Administrator, then press the
PTT
switch. The DTMF tones sent during the dialing se-
quence will be heard in the speaker.
In the
VX-459
, press (or press and hold) the assigned
Programmable key, then press the front panel’s nu-
meric key corresponding to the Auto-Dial memory
number list provided by your Dealer or Network Ad-
ministrator. The DTMF tones sent during the dialing
sequence will be heard in the speaker.