Operation Manual

VX-450 SerieS Operating Manual
33
adVanced operatIon
status set
(
Vx-454 & Vx-459 only
)
Press (or press and hold) the assigned Programmable
key to change the 5-Tone status code. To change the
status code, select the desired digit by
[
A
]
key, then
change the number by
[
B
]
/
[
C
]
key, and store the
number by
[
D
]
key.
status up/doWn
(
Vx-454 & Vx-459 only
)
Press (or press and hold) the assigned Programmable
key to select a 5-Tone status code from the pre-
dened status list.
status cHecK
(
Vx-454 & Vx-459 only
)
Press (or press and hold) the assigned Programmable
key to check the 5-Tone receive status code. When
you press (or press and hold) this key, the display will
indicate the “Message” corresponding to the receive
status condition per the pre-dened status list.
duty
Press (or press and hold) the assigned Programmable
key to toggle the Duty function of the 2-tone/5-tone
decoder “On” and “Off.”
When the Duty function is set to “On,” the user will
always hear (depending on the sub-audio signalling)
all trafc on the paging channel. The radio will sound
the paging alert when it receives the programmed
2-tone/5-tone code.
When the Duty function is set to“Off,” the user
will NOT hear normal radio traffic on the pag-
ing channel. The radio will sound the paging alert
and unmute only when it receives the programmed
2-tone/5-tone code.