Specifications

5VX-1400 OPERATING MANUAL
[
POWER
( )]
Switch
This is the main on/off switch for the VX-1400. Press and hold this switch for 2
seconds to toggle the transceiver’s power on and off.
Speaker
The internal speaker is located here.
TX/BUSY LED
This indicator glows green when a signal is being received and red when transmitting.
[

]
/
[

]
Button
Pressing these buttons selects the operating frequency (while in the VFO mode) or
memory channel (while in the Memory mode and ITU mode).
LCD Display
This multi function LCD (Liquid Crystal Display) includes frequency readout or Al-
pha/Numeric “Tag” labeling of the channel in use, plus a Signal Strength/Power Out-
put meter, and icons which provide visual confirmation of transceiver status.
VOL Knob
This control adjusts the receiver audio volume from the speaker. Clockwise rotation
of this control increases the volume level.
FRONT PANEL CONTOL & SWITCHES
Dual Watch feature is activated
Key Lock active
Noise Blanker is activated
Encryption is enabled
VOX feature is activated
: This channel is in the Scan list
: Priority Scan is activated
Selcall Message or ALE Message is received
MENU mode is activeSelcall feature is activated
Channel Group
ACC signal is being received
Selcall / ALE function
Status
ALE feature is activated
Antenna Tuner / Power Amplifier Status
14 character alpha-numeric display
Medium Power Transmit mode
Low Power Transmit mode S/PO meter Shift direction of the Clarifier