Specifications

VX-1400 OPERATING MANUAL4
MIC Jack
This modular jack accepts microphone voice input, as well as scanning and PTT (Push
To Talk) control from the microphone. Specified microphone impedance is 500 - 600
Ohms.
[
S1
]
,
[
S2
]
,
[
P0
]
-
[
P4
]
Button
(
PROGRAMMABLE FUNCTION BUTTONS
)
These seven buttons functions can be customized via programming by your Vertex
Standard dealer. The factory defaults are shown below.
[
S1
]
button: Press this button to toggle the Display Brightness Level between “High”
and “Low”.
[
S2
]
button: Press this button to toggle the Noise Blanker “on” and “off.”.
[
P0
]
button: Press this button to change the synthesizer step in the VFO mode.
[
P1
]
button: Press this button to activate the Antenna Tuning Process.
[
P2
]
button: Press this button to activate the “Squelch Adjusting” mode (for quieting
random noise).
[
P3
]
button: Press this button to activates the Clarifier function (allows tuning the
receiver frequency without changing the transmit frequency).
[
P4
]
button: Press this button to select the operating mode.
[
MENU
]
Button
Pressing this button activates the Menu mode which changes the configuration of the
transceiver’s parameter.
[

]
/
[

]
Button
Pressing these buttons selects the frequency control method among “VFO mode”,
“Memory mode”, and “ITU mode”.
FRONT PANEL CONTOL & SWITCHES