Security Camera User Manual

VerteX RTH Series H.8 and H.16 Series

Recording Type Setting

Continuous

{Record} Æ {Rate} Æ Normal: 1~30

Motion

{Event} Æ {Motion}: Part or All

Sensor

{Event} Æ {Sensor}: 1~16

{Record}Æ{Rate}Æ Event: 1~30

Automatic

Enables setting both Normal and Event simultaneously

E) Recording Frame

In case of Continuous/Motion/Sensor/Audio Mode, the user can only set the frame. In case of Automatic Mode,

the recording frame can be divided into the {Normal} type and {Event} type.

Normal

Sets the recording frame rate for Automatic and Continuous recording

Event

Sets the recording frame rate for Automatic, Motion and Sensor

Maximum Recording Frame by Resolution (NTSC)

Resolution

Model

CIF (352ⅹ240) Field (704ⅹ240) Full (704ⅹ480)

VERTEX RTH-16 / H.16

480fps 240fps 120fps

VERTEX RTH-8 / H.8

240fps 120fps 60fps

VERTEX RTH-412

120fps 60fps 30fps

 Select Frame Rate.

 In adjusting the frame rate, setting the frame rate to be higher than the maximum frame rate causes a

menu to be displayed as shown in [Figure 5-33]..

 The red-colored channel is currently being set as shown in [Figure 5-33]. Any unused channel will be

deleted first.

[Figure 5-33. Frame Rate Re-Setup Window]

F) Audio

Used to set the recording for the external audio input linked to the system.

6-2-4. Event

A) Motion

This function detects the movement of images. Detection settings include {Off} / {Partial} / {All} / {Sensitivity}.

The default value is Off, however.