Security Camera User Manual

VerteX RTH Series H.8 and H.16 Series
41
※ For more information on setting the Tour feature, select {Menu} Æ {Setup} Æ {PTZ} Æ
{Tour}.
 In Tour, you can select [Disable] / [Able]. If you choose [Able], [Tour 1] and [Tour 2] are available.
 8 spots of PTZ preset are available for each [Tour1] and [Tour2].
 In Tour {Menu} Æ {PTZ Control}, you can set up Tour1/Tour2 and [Disable].
D. horizontal/vertical
 Control horizontal/vertical movement using the arrow keys.
E. Zoom In/Out
 Control Zoom using {Wide} / {Tele} buttons.
F. Focus Control
 Control Focus using {Far} / {Near} buttons.
G. Preset {Set}
Preset? Using horizontal/vertical/Zoon/Focus movement of PTZ Camera, zoom or
focus a certain spot of the image by designating the coordinates and move to the
designated coordinates quickly.
 Move to a desired spot for Preset by using Horizontal/Vertical, Zoom and Focus.
 Select 1~8 spots by pressing {Preset}
 Press {Set} button to complete Preset setup.
 Repeat ①-③ to another Preset. Up to 8 Preset are available.
H. Preset {Go}
 Select Preset Number by using {Preset} button.
 Pressing {Go} button moves PTZ camera by Horizontal/Vertical, Zoom and Focus movements to the
Preset spot.
I. Home Position Time
If there are no controlling signals to PTZ camera after a certain time, it goes automatically to the Preset No.1
position as Preset No. 1 is designated as Home Position.
 Select {Home Position Time} using the arrow keys and the Select button.
 Select {Off/10seconds/20seconds/30seconds/User Setup} using the arrow keys and the Select
button.
J. Menu
Select Menu button to shift to 1 channel view over PTZ set camera. PTZ Menu is controllable.
Chapter 6. Setup
6-1. Time
※ Function Description
1. Time Synchronization
1) Synchronization with the NTP server
The time is synchronized every hour with the NTP Server.
A. Automatic Setup
The nearest server from the user’s zone will be selected for connection. If the connection fails, the next
nearest server will be chosen.
B. User Setup
The user sets the URL or IP for the NTP server. If connection is not established, a message will be sent to