Security Camera User Manual

VerteX RTH Series H.8 and H.16 Series
24
Chapter 5. System Operation
5-1. Starting and Exiting the System
5-1-1. Starting the System
 With the power connected, press the Power button.
 After the system is booted, images of all connected channels will be displayed.
5-1-2. Exiting the System
※ The default password for the local administrator is “00000.”
※ To change the password, select {Main Setup} Æ {System} Æ {Local Administrator’s
Password}.
 Press the Power button on the remote controller.
 On the password input screen, enter a new password using the numeric buttons and the arrow keys.
 After authentication is completed, the alarm will sound for 20 seconds, and the system will be terminated.
5-2. Monitoring
z
Various Screen Division and Auto Sequence
z
Channel Grouping
z
Spot
z
Menu Controlling in Monitoring Mode
After the system is booted, images will be displayed on a screen divided into [16/8/4] according to its setting. In
case of 16 channels DVR, the screen can be divided into 1, 4, 9, and 16 sub-screens. Auto-sequencing from is
available in each mode.
5-2-1. Screen Division and Auto Sequence
Full Screen (16 groups)
Use the Full Screen mode.
To view a certain channel, select the desired channel using the numeric buttons.
4Sub-Screen (4 groups)
Use the 4 Sub-Screen button.
9Sub-Screen (2 groups)
Use the 9 Sub-Screen button.
16Sub-Screen(1 group)
1 2 3 4
5 6 7 8
9 101112
13141516
Use the 16 Sub-Screen button.