Security Camera User Manual

VerteX RTH Series H.8 and H.16 Series

[Figure 4-7. Storage Device New Tab Window]

Direct Initialize

Changes the selected storage into a dedicated direct storage.

Backup Initialize

Changes the selected storage into a backup storage.

{New} At least, one storage shall be selected as a dedicated storage.

Otherwise, the data cannot be stored in real time.

④ Select {Direct-Init} and follow {Direct-Init} procedure.

{Direct-Init} procedure may take time.

 When it is completed, HDD is removed from {New} tab and shifted to {Direct} tab.

 Move to {Direct} tab and select.

 As shown below, it is indicated as [ACTIVE/HEAL..] in {Status(SW/HW)}, and HDD setup is

completed.

[Figure 4-8. Menu Window]

More detail description for HDD and Storage Device; check [6-4 Storage Device].

4-5. Recording Setup

 Select {Menu} Æ {Setup} Æ {Recording}.

 Setup for [Recording Resolution]/[Recording Quality]/[Mode]/[Recording Frame]/[Audio]/[Motion

Detection]/[Sensor Detection]/[Event] and Alarm Output are available.

The initial recording setup is [Recording Resolution: CIF] [Recording Quality: High] [Mode:

Continuous]. An image of the connected cameras is recorded with above setting. For more

detail, check [6-2 Recording].