Security Camera User Manual

VerteX RTH Series H.8 and H.16 Series
12
2-3. Installation and Connection
[Figure 2-1. VERTEX RTH-16 Basic Connection and Device Connection]
[Figure 2-2. H.16 Basic Connection and Device Connection]
2-3-1. Basic Connection
By referring to above [Figure 2-1. VERTEX RTH-16 Basic Connection and Device Connection] and [Figure 2-2.
H.16 Basic Connection and Device Connection], Connect the CCTV camera, CCTV monitor (or VGA monitor),
and USB mouse to the DVR and set up CONFIG SWITCH.
Connected Device DVR Terminal
1
CCTV camera Rear Video Input
2
CCTV monitor Rear TV
3
VGA Monitor / LCD Monitor Rear VGA-OUT
4
Mouse
VERTEX RTH-Series: Front USB / H.8 AND H.16-Series : Right
Side USB
5
CONFIG SWITCH Rear NTSC/PAL or VGA/TV Setup
※ Refer to a further description of CONFIG SWITCH below.