User manual

User Manual Rayocomp PS 1000 Polar Page 1-2
1.2 What do you have to regard when switching the
Rayocomp PS 1000 Polar on or off?
In the rear part of the Rayocomp PS 1000 Polar, you will find the on/off switch
(see arrow) of the device.
Switching-on
Please never switch on the Rayocomp PS 1000 Polar, before the temperature of
the device has been adapted to the surrounding temperature. For example, if
the device has been standing in the car in winter, make sure of sufficient
acclimatisation, otherwise condensation water formation may damage the
machine, when it is switched on.
As soon as the device has been switched on, you will see a red luminous diode
in front, on the right side above the display. After approx. 40 seconds, this
changes to green. The device is now ready for use.
Switching off:
Before the Rayocomp PS 1000 Polar can be switched off, you must press the
Switch-off
key on the right upper side of the main menu. After a safety
confirmation, the device requires approx. 10 seconds, before a display tells
you, that the Rayocomp PS 1000 Polar can now be switched off.