User manual

User Manual Rayocomp PS 1000 Polar Page 2-51
2.8 Questions concerning the secondary menu point “Energetic
uplication” d
2.8.1 How can I carry out energetic duplication of substances?
With the Rayocomp PS 1000 Polar, you can transfer the oscillation pattern of a
substance to another carrier medium, i.e. Rayotabs.
Please regard, that it is prohibited to produce an energetic duplicate and
assign healing properties to this. Therefore, you must never pass on
energised Rayotabs bearing a label which suggests, the tabs may have
healing properties.
Select the Bio-resonance
according to Paul
Schmidt in the main
menu, then press the key
Energetic duplication to
perform the required
functions.
The picture you can see
on the right appears.
Now you can enter the
transfer time. It is pre-
set to 1 minute and 20
seconds.
Place the original substance into the protection cup and the Rayotabs into the
measuring cup (on the front, right of the Rayocomp PS 1000 Polar).
With the key Start the
transfer, the energetic
duplication can
commence.
Energising is performed
with the polariser set to
+/- as a standard.
Energised Rayotabs may
lose their impressed
oscillation patterns, if
they are exposed to
strong sources of
disturbance from
outside, like E-smog,