User manual

User Manual Rayocomp PS 1000 Polar Page 2-
39
2.6.2 How can I enter single interference values into the memory, delete
single values, delete the complete contents of the memory or delete double
values from the memory?
2
1
Select the Bio-resonance
according to Paul Schmidt in
the main menu, then press
the key Memory
management and finally the
key Enter, delete
interference value, …
before applying the required
functions.
The picture you can see on
the right appears.
In the display window (caption 1) the values currently saved in the memory,
taking the resonance selection key (caption 2) into account, are displayed. In
this picture, all values are displayed, because all resonance selection keys have
been selected. If you press the key OR (without resonance) in this situation, the
values, which had no resonance, disappear, in other words, only the resonances
of the active keys (N, +/-, +, -) are displayed. Use the navigation keys to move
within the displayed interference values.
A further value can be added to the current position, if the key Insert
is
pressed. When this key is pressed, an entry window for an interference value
appears.
Press the key Delete single
, and the value displayed in the current display
window with grey background is deleted, but not before you have confirmed
your order, which is a safety measure to avoid accidental deleting.
With the key Delete complete selection, the complete memory can be deleted,
as soon as you have confirmed your order.
To delete double interference values from your memory, simply activate the key
Delete double values.
The key Return to the menu brings you back to the standard display of the
memory management .