User manual

User Manual Rayocomp PS 1000 Polar Page 2-
35
The pictures shows, that
two programs have been
selected. You can see the
two programs in the right
selection window. Read
the following text in the
first line: o.M. 00:30 R 51
Pre-control. o.M means,
that the program will not
be accompanied by music.
If music would also have
been selected beforehand,
you would read the letters
m.M: (with music). 00:30
means, that every
interference value
contained in the program
will be harmonised for 00 minutes and 30 seconds. The R of R51 Pre-control
stands for the Rayonex programs (U= Program according to Dr. med. Elmar
Ulrich, S=Special program, E= Own program, A=Acupuncture program).
With the key Start harmonizing, you change over to the harmonizing window:
On the top, you can read
the remaining
harmonizing time. From
the information line
below, you can read,
which program is
currently being
harmonised. Press the
Start
key to begin with
harmonising. If you
should be testing while
harmonising, you can use
the keys Previous
and
Next to move forward and
backward between the
interferences and select
the one you need.
Furthermore, you can alter the polarisation during the harmonizing process
with the aid of the keys arranged on the bottom right. The standard setup
is + /-.
You might want to interrupt the harmonizing process for some reason (perhaps
the patient wants to go to the bathroom); simply press the Interrupt key. A
window appears, which allows you to continue with harmonizing whenever you
like.