User manual

User Manual Rayocomp PS 1000 Polar Page 2-15
Is the present intolerance strong or weak?
Now test with the sensor to find out, whether you achieve a rotation (left or
right motion) or a linear movement. If you achieve a rotation, the substance
cannot destabilise the corresponding field of the organism, in other words, the
body has no problems with this substance.
If, however, the achieved motion is linear, this patient is suffering from an
intolerance of the substance. If it is irrelevant for you, whether the blockade is
strong or weak, you now press the button on the sensor in the direction of the
spring wire. The device will store a N - resonance. Then press the button of the
sensor to the right, and the next ampoule can be tested.
If you want to know exactly, which polarisation is most suitable for helping the
organism, or if you want to find out, whether the disturbance is strong or weak,
then press the button down after having tested a linear movement on N. Now
the polariser is switched over to polarisation +/-. If the sensor is now already
performing a rotation, the intolerance is not very strong. In this case, press the
button of the sensor to the right, and the next ampoule can be tested. If the
linear movement continues when set to +/- polarisation however, the
intolerance is stronger. Press the button down again and test, whether the +
polarisation, which is now set, leads to a rotation. Rotation means, that the +
polarisation is most suitable for harmonization. If still no rotation could be
achieved, press down the button of the sensor once more. Now you will see,
that there is a rotation on the – polarisation.
In this way, you must test all the ampoules of the set. If you are unsure,
whether you have skipped an ampoule by mistake, you can press the button of
the sensor to the left, and you will return to the previous ampoule. If you need
further information concerning this test, you can find it in the answer to
question 2.2.1.