User manual

User Manual Rayocomp PS 1000 Polar Page 2-9
2.2.4 How do I test individual indications comfortably, without having to
use written indication lists?
In the past, the single indications had to be looked up in corresponding
indication lists in order to find the right diagnosis, but now the Rayocomp PS
1000 Polar offers a very comfortable solution. The instantaneously available
indication values are already integrated in the device and can be called up very
easily.
After you have pressed
the key Bio-resonance
according to Paul
Schmidt in the main
menu, please activate the
key Test. Then please
press the key Test
according to indication
on the left side. The
picture you can see on
the right appears (with
value no.1, however).
For example, you want to find out in the diagnosis, whether the patient already
shows signs of degeneration of the intervertebral disk, please press the key
alphab. search. Now, a text window opens, and you can enter the first three
letters of the indication you are looking for, in this case int. Confirm the entry.
Now the display window shows the first value of the indication you are looking
for. If you press Test start
now, the corresponding interference is set up for
testing.
If you want to go on testing, press the key alphab. search again, and enter the
indication you are looking for a second time. The so-found resonances are
stored altogether and can be used for harmonizing directly, when the key
Harmonize
is activated.
If you have drawn up a patient file in the patient administration beforehand, the
device will store the testing and save it for a later date
If you need further information concerning this test, you will find it in the
answer to question 2.2.1.