User manual

User Manual Rayocomp PS 1000 Polar Page 2-5

In this way, you must test all the interferences offered to you. If you are unsure,

whether you have skipped an interference by mistake, you can press the button

of the sensor to the left, and you return to the previous interference.

If you have already defined a patient in the patient history before testing, these

values are automatically stored when leaving the test and can be called up or

tested again later on.

In the following, you will find a summary of the functions of the sensor:

Alter

polarisation

interference value

Storing an

N-resonance

Sprin

wire

Handle, wood

Next interference

value

Sensor

button

Note: During the process of testing, do not hold the Rayotest in immediate

proximity of the patient or above the device.