User manual

User Manual Rayocomp PS 1000 Polar Page 2-3
2.2 Questions concerning the secondary menu point “Testing”
2.2.1 How does the testing process with the sensor (Rayotest) and the
integrated polariser work in the Rayocomp PS 1000 Polar, and how
can I find out, whether an energetic disorder is weak or very strong?
The basic disclosures for polarisation can be found in the second part of this
user manual, therefore the practical application with the device will be
explained in the following.
Testing single interferences emanating from the device with the Rayocomp PS
1000 Polar and the connected sensor is always performed in the same way.
As an example, the geopathy test is explained in the following.
After you have
pressed the key Bio-
resonance according
to Paul Schmidt in
the main menu,
please activate the
key Test. Then press
the key Geopathy
test on the right side.
The picture you can
see on the right
appears.
Currently, the
interferences shown
in the display (see
caption 1) are in the
display mode (see caption 2). In the display mode, you can look at the
interference values and their resonances with the help of the navigation keys
without setting every single value first. This function is particularly useful if you
want to look at a previous test and its results from the patient history.
2
1
3
5
4
In general, you can print the interference values and their resonances in the
display window at any time (see caption 3) or use them for harmonization (see
caption 4).
With the Start key (see caption 5), you switch over from the display to the test
mode, which is described in detail on the following pages.