User manual

User Manual Rayocomp PS 1000 Polar Page 2-2
2.1 Questions concerning the secondary menu point “Direct”
2.1.1 How can I enter, test and harmonize interferences very quickly
with the function “Direct”?
After you have pressed the key
Bio-resonance according to
Paul Schmidt in the main
menu, please activate the key
marked with an arrow.
As a result, the following page
is displayed:
In the menu point Direct,
you can enter a total of five
interferences. The function
Direct is particularly suitable
for quick testing or
harmonising. The entered
values are not taken over in
the memory . For entering
your required interferences,
please select one of the five
keys (see caption 1). Then
enter the required
interferences via numerical
keys and confirm the entry
with the OK key. When all
interferences have been entered, press the key Setup (see caption 2), and a
stand-by display will appear for a short while. This is the time required for
setting up the interference values. After the setting-up process, you can see the
currently set interferences in the right margin of the screen (see caption 3). Of
course, you can also apply the functions of the polariser here.
1
2
3
Basic details concerning polarisation can be found in chapter 2 of this user
manual. Further information on testing with polarised oscillation can be
obtained in 2.2.1.