User manual

User Manual Rayocomp PS 1000 Polar Page 1-7
1.5 How can I enter an interference value in the Rayocomp PS 1000
Polar?
Several places of the application allow the entry of interference values. An
external keyboard is not available, therefore a keyboard has been programmed
in the device. The picture below shows the entry of a start value as an example:
1
2
3
6
5
4
If you want to enter an interference, a description of the anticipated
interference always appears in the upper part of the monitor (see caption 1). In
this case, the name of the start value (i.e. of a range value test) shall be
entered. Beneath the description (see caption 2), the entry format is indicated.
The entered interference is displayed in the text field indicated by caption 3.
For example, if you want to enter the interference value 0.50, it is sufficient to
press the decimal point and 5. The other digits are generated automatically.
The key Delete (caption 4) deletes the last entered digit of the entry. After
completing the text, confirm with the key Take over (caption 5). If you do not
want to take over the text, you can use the key Cancel (caption 6).
Note:
If the key Close (top, right) is activated, the entry will not be taken over.