Specifications

DMU-2000 DATA MANAGEMENT UNIT Page 7
4. CHANGING THE LOCATION
(
1
)
Using the World Map
 Choose (highlight) the “ZONE” using the
[
KEY1
(

)]
~
[
KEY4
(

)]
keys, then press the
[
KEY7
(
SELECT
)]
key.
 The name of the country associated with the highlighted
Time Zone may now be selected using the
[
KEY1
(

)]
~
[
KEY4
(

)]
keys. Press the
[
KEY7
(
SELECT
)]
key
when you have made your selection.
 You may now select one of the displayed cities in the
same way. When you have made your choice, press
the
[
KEY7
(
SELECT
)]
key.
Advice: Depending on the country, there may be only one
city (or no cities) listed. In these instances, to modify the
setting, please first select a city name on the list, even if
you do not see the city you want; you may modify the city
name later.
(
2
)
Using the Longitude/Latitude Data
If you know the Longitude/Latitude of the your location,
you may set the location from the Longitude/Latitude data.
 Press the
[
KEY6
(
LON/LAT
)]
key. The display
changes as follows.
PLEASE READ THIS FIRST
 Press the
[
KEY7
(
SELECT
)]
key, then enter the Lon-
gitude using the
[
KEY1
(

)]
~
[
KEY4
(

)]
keys. Use
the
[
KEY3
(

)]
and
[
KEY4
(

)]
keys to navigate to
each column, then use the
[
KEY1
(

)]
and
[
KEY2
(

)]
keys to select the desired numbers in each column.
Note: The Longitude data is input in decimal form.
The seconds may also be input in sexagenary form.
For example, if you want to input 138 degree 28 min-
utes 15 seconds,
1. Input “13828.00” by using
[
KEY1
(

)]
~
[
KEY4
(

)]
keys.
2. Press
[
KEY4
(

)]
key and move the cursor to the
right side of the column.
3. Input “15.”
4. Press
[
KEY7
(
SELECT
)]
key, and the numeric
(second) will be converted to the decimal number
and the Longitude input is completed.
 When entry is complete, press the
[
KEY7
(
SELECT
)]
key again.
 Choose (highlight) “LAT” using the
[
KEY1
(

)]
~
[
KEY4
(

)]
keys, then press the
[
KEY7
(
SELECT
)]
key.
 Enter the Latitude in the same manner as described above.
 When entry is complete, press the
[
KEY7
(
SELECT
)]
key again.
FUNCTION TABS
3. LOCAL TIME SETUP
 Press and hold in the FT-2000’s
[
DISPLAY
]
key (or
the
[
ENT
]
key of the FT-950 or FT
DX5000) for more
than two seconds, white letters will appear in the tabs
at the bottom of the screen to indicate various func-
tions, and the FT-2000’s
[
F1
(
CH-1
)]
~
[
F7
(
P.BACK
)]
&
[
DISPLAY
]
keys (or the
[
1.8
(
1
)]
~
[
24.5
(
8
)]
keys of the FT-950 or FT
DX5000) will act
as “Function” keys.
 A World Map should be displayed on the monitor. If
the World Map does not appear, press the
[
KEY1
(
MAP
)]
key to get the World Map to display
on the monitor.
 Press the
[
KEY8
(
DISPLAY
)]
key to change the ac-
tion of the “Function” keys, then press the
[
KEY1
(
SET
)]
key; the monitor should now show
“LOCAL TIME-1;” this setting has been pre-set for
Japanese time at the factory.