Specifications

Page 69FT-450 OPERATION MANUAL
BEEPER SETTING
Beep Volume
You may adjust the beep volume level via the Menu Item “BEEPVOL”.
1. Press and hold the
[
F
]
button for one second to
enter the Menu mode. The “
” icon will ap-
pear on the display.
2. Rotate the
[
DSP/SEL
]
knob to select the menu
item “
BEEPVOLBEEPVOL
BEEPVOLBEEPVOL
BEEPVOL”.
3. Press the
[
DSP/SEL
]
knob to enable adjustment
of this menu item. The “ ” icon will be blink-
ing.
4. Rotate the
[
DSP/SEL
]
knob to set the desired beep
volume level (
FIX 0FIX 0
FIX 0FIX 0
FIX 0 -
FIX 100FIX 100
FIX 100FIX 100
FIX 100).
WARNING! Do not adjust the beep volume too
high. You may press the [METER/DIM] button to
sound a beep as you adjust the
[
DSP/SEL
]
knob.
If you wish to adjust the beep volume level in ac-
cordance with the [AF GAIN] knob, press the
[
F
]
key to change the display to “
LNK-XXLNK-XX
LNK-XXLNK-XX
LNK-XX” then rotate
the
[
DSP/SEL
]
knob to set the volume ratio of the
beep volume level for the receiving audio volume
level. Available selections are “
LNK-50LNK-50
LNK-50LNK-50
LNK-50” ~ “
LNK 0LNK 0
LNK 0LNK 0
LNK 0”
~ “
LNK+50LNK+50
LNK+50LNK+50
LNK+50”. When the “
LNK 0LNK 0
LNK 0LNK 0
LNK 0” is selected, the
beep volume level is the same as receiving audio
volume level.
You may press the [HOME/RCL] button to reset
the beep volume level to the factory default.
5. Press the
[
DSP/SEL
]
knob. The “ ” icon re-
turns to appear continuously.
6. Press and hold the
[
F
]
button for one second to
save the new setting and return to normal opera-
tion.
M ISCELLANEOUS S ETTINGS
[
HOME/RCL
]
button
[
F
]
button
[
DSP/SEL
]
knob
[
METER/DIM
]
button