Specifications

Page 38 FT-450 OPERATION MANUAL
DSP MICROPHONE EQUALIZER
You may select one of ten available DSP equalization techniques for transmitted microphone audio.
1. Press and hold the
[
DSP
]
button for one second.
This instantly activates menu item “
MIC EQMIC EQ
MIC EQMIC EQ
MIC EQ”. The
“ ” icon will appear on the display.
2. Press the
[
DSP/SEL
]
knob to enable adjustment of
this menu item. The “ ” icon will be blinking.
3. Rotate the
[
DSP/SEL
]
knob to select the desired
equalizer pattern.
Observe the relative equalizer pattern on the dis-
play.
(You may press the
[
HOME/RCL
]
button to reset
the equalizer pattern to the factory default.)
4. Press the
[
DSP/SEL
]
knob. The “ ” icon
returns to appear continuously.
5. Press and hold the
[
F
]
button for one second to
save the new setting and return to normal opera-
tion.
The available selections are:
00
00
0: Flat
11
11
1: Low-frequency components are reduced.
22
22
2: Mid-frequency components are reduced.
33
33
3: High-frequency components are reduced.
44
44
4: High-frequency components are enhanced.
55
55
5: Mid-frequency components are enhanced.
66
66
6: Low-frequency components are enhanced.
77
77
7: Low-frequency components are enhanced
and High-frequency components are re-
duced.
88
88
8: Low-frequency components are reduced and
Mid-frequency components are enhanced.
99
99
9: Low-frequency components are reduced and
High-frequency components are enhanced
SSB/AM MODE TRANSMISSION
[
HOME/RCL
]
button
[
F
]
button
[
DSP/SEL
]
knob
[
DSP
]
button