Specifications

Page 99FT-450 OPERATION MANUAL
SPECIFICATIONS
Receiver
Circuit Type: Double-conversion superheterodyne
Intermediate Frequencies: 67.899 MHz / 24 kHz
Sensitivity (IPO “OFF”, ATT: OFF): SSB (2.4 kHz, 10 dB S+N/N)
0.25 μV (1.8 - 2.0 MHz)
0.25 μV (3.5 - 30 MHz)
0.20 μV (50 - 54 MHz)
AM (6 kHz, 10 dB S+N/N, 30 % modulation @400 Hz)
2.00 μV (1.8 - 2.0 MHz)
2.00 μV (3.5 - 30 MHz)
1.00 μV (50 - 54 MHz)
FM (BW: 15 kHz, 12 dB SINAD)
0.50 μV (28 - 30 MHz)
0.30 μV (50 - 54 MHz)
There is no specification in frequency ranges not listed.
Squelch Sensitivity: SSB/CW/AM
(IPO “OFF”, ATT: “OFF”) 2.50 μV (1.8 - 30 MHz)
1.00 μV (50 - 54 MHz)
FM
0.32 μV (28 - 30 MHz)
0.16 μV (50 - 54 MHz)
There is no specification in frequency ranges not listed.
Selectivity (–6/–60 dB): Mode –6 dB –60 dB
CW 0.5 kHz or better 1.2 kHz or less
SSB 2.2 kHz or better 4.5 kHz or less
AM 6 kHz or better 20 kHz or less
FM 15 kHz or better 30 kHz or less
FM-N 9 kHz or better 25 kHz or less
Image Rejection: 80 dB or better (160 - 10m Amateur bands)
65 dB or better (6m Amateur band)
Maximum Audio Output: 2.2 W into 4 Ohms with 10% THD
Audio Output Impedance: 4 to 16 Ohms (8 Ohms: nominal)
Conducted Radiation: Less than 4000 μμW
Specifications are subject to change, in the interest of technical improvement, without notice or obligation, and
are guaranteed only within the amateur bands.