Specifications

51FT-857D Operating Manual
DSP Microphone Equalizer
In the SSB, AM, and FM transmission modes, you may use the DSP system to change the
frequency response of the audio stage. This will allow you to roll off excessive high- and/or
low-frequency components of your voice’s audio characteristics.
To set up the DSP Microphone Equalizer feature:
1. Press and hold in the
[
DSP
]
key for one second. This instantly activates Menu Mode
No-048
[
DSP MIC EQ
]
.
2. Rotate the DIAL to select one of the following equalization choices:
OFF: Microphone Equalization Off
LPF: High Cut (lower frequencies are emphasized)
HPF: Low Cut (higher frequencies are emphasized)
BOTH: High/Low Cut (mid-range frequencies are emphasized)
3. When you have made your selection, press and hold in the
[
FUNC
]
key for one second
to save the new setting and exit to normal operation.
TRANSMITTER OPERATION
SSB/AM TRANSMISSION