Specifications

19FT-857D Operating Manual
INSTALLATION
MMB-82 MOBILE BRACKET INSTALLATION
 Choose a mounting location with sufficient clearance for the transceiver. Using the
mounting bracket as a template for the mounting holes, use a 4.8 mm bit to drill the
mounting holes, and secure the mounting bracket with the supplied screws, washers,
and nuts (see diagram below).
 Position the transceiver in the bracket so that the holes in the side are aligned with these
in the bracket, and bolt the transceiver into place using the supplied short screws.
 Do not install this transceiver in a confined space such as a book case or similar
unit.
 Provide a few centimeters of space on either side of the transceiver.
Use the supplied screw or
screw of the equivalent size (M4x6).