Operation Manual
EVX-530 SEriES OpErating Manual 1
Important Notice for North American Users Regarding 406 MHz Guard Band
The  U.S. Coast  Guard  and  National  Oceanographic  and Atmospheric Administration have  requested  the 
cooperation of the U.S. Federal Communications Commission in preserving the integrity of the protected 
frequency range 406.0 to 406.1 MHz, which is reserved for use by distress beacons. Do not attempt to pro-
gram this apparatus, under any circumstances, for operation in the frequency range 406.0 - 406.1 MHz if 
the apparatus is to be used in or near North America.
Warning - Frequency band 406 - 406.1 MHz is reserved for use ONLY as a distress beacon by the US Coast 
Guard and NOAA. Under no circumstance should this frequency band be part of the pre programmed oper-
ating frequencies of this radio.
IntroductIon
The 
EVX-530
  series  are  full-featured  Hand-Held  Digital/Analog Transceiver  designed  for  business  communica-
tions in the VHF/UHF Land Mobile bands. These transceivers are designed for reliable business communications in 
a wide variety of applications with a wide range of operating capability provided by their leading-edge design.
The 
EVX-531
  allows  up  to  32-channel  capacity  within  a  maximum  2  groups. The 
EVX-534/-539
  allows  up  to 
512-channel  capacity  within  a  maximum  32  groups  which  can  each  be  programmed  with  an  8-character Alpha-
Numeric Tag.
Important channel frequency data is stored in the ash memory, and is easily programmable by a Vertex Standard 
licensed dealers using a personal computer with Vertex Standard Programming equipment: 
FIF-12
 USB Program-
ming Interface, and 
CT-106
 Connection cable with 
CE142
 Software. Or, once a single radio is programmed, clon-
ing cable 
CT-27
 can be used to program additional radios directly.
The pages which follow will detail the many advanced features provided in the 
EVX-530
 series transceiver. After 
reading  this  manual,  you  may  wish  to  consult  with  your  Network Administrator  regarding  precise  details  of  the 
conguration of this equipment for use in your application.










