Instruction manual

EDID FUNCTION
NOTE : The already learned EDID cannot be modied. You can only rebuild a new Learning EDID.
For example:
When the Source has “Learned” the EDID data from a destination, It will save that EDID information into EPROM and the
EDID data cannot change. Please select new learning destination to sources or change to one of the embedded EDID modes
when you want to remove the learning EDID memory from EPRPM.
Mode 1. FSS (Fast Speed Start)
Fast Speed Start mode shortens the startup time of the switcher. Selecting
this mode does not force the EDID setup to be cancelled. Users may rst
select one EDID mode from mode 2 to 3, and then select mode 1 for fast
speed start.
Mode 5. H36-3D-M (1080p-36 bits)
Audio Support : MAT(MLP) 7.1CH, PCM 2CH, One Bit Audio 2CH, AC-3
5.1CH, DTS 5.1CH, PCM 7.1CH, Dolby Digital + 7.1CH, DTS-HD 7.1CH
Mode 2. H24-3D (1080p-24 bits)
Audio Support : PCM 2CH
Mode 6. 1280x1024-60Hz (DVI-D)
DVI-D 1280x1024 60Hz
Mode 3. H24-3D-M (1080p-24bits)
Audio Support : MAT(MLP) 7.1CH, PCM 2CH, One Bit Audio 2CH, AC-3
5.1CH, DTS 5.1CH, PCM 7.1CH, Dolby Digital + 7.1CH, DTS-HD 7.1CH
Mode 7. 1920x1200-60Hz (DVI-D)
DVI Support : DVI-D 1920 x 1200 60Hz
Mode 4. H36-3D (1080p-36 bits)
Audio Support : PCM 2CH
Mode 8. AUTO <Default>
All Outputs will be set to the highest common resolution of all connected
display devices.
Learning EDID Single to Single Example : Learn Destination #8 EDID To Source #5.
Step 1. Press EDID button
The button will ash blue and the display will show the current Embedded EDID
Status.
Step 2. Press the Destination #8 button row
Copy the Destination #8 Display EDID.
Step 3. Press the Source #5 button row
Learning the Destination #8 EDID to Source # 5.
Step 4. Press ENTER button
To conrm entries.
Learning EDID Single to Multiple Learning destination EDID link to the majority Sources
Step 1. Press EDID button The button will ash blue and the display will show the current Embedded EDID Status.
Step 2. Press the Destinations #1 ~ 8 button row Copy any 1~8 Destinations EDID.
Step 3. Press the Source #1, #6~#8 button row Learning the Destination EDID link to Source #1, #6 ~ #8 .
Step 4. Press ENTER button To conrm entries.
Learning EDID Single to ALL Learning destination EDID link to All Sources
Step 1. Press EDID button
The button will ash blue and the display will show the current Embedded EDID
Status.
Step 2. Press destination button 1 thru 8
Learning anyone 1~8 Destination EDID to all sources.
Step 3. Press ALL button
Learning selected destination EDID to all sources.
Step 4. Press ENTER button
To conrm entries.
14