User's Manual

EVX-261 OPERATING MANUAL 19
Note that your dealer may have mode provision for “Talk
Around” channels by programming “repeater” and “Talk
Around” frequencies on two adjacent channels. If so, the
key may be used for one of the other Pre-Programmed
Functions.
RESET
When operating in the selective call feature, resets the
communication by an assigned
PF
key.
CALL
Send a pre-programmed 2 Tone call signal with a one
touch
PF
key.
CALL 1 TO CALL 3
Recalls the pre-programmed stations with a one touch
PF
key.
SPEED DIAL
Your Vertex Standard dealer may have pre-programmed
Auto-Dial telephone number memories into your radio.
To dial a number:
Press, (or press and hold), the assigned
PF
key to send a
pre-defi ned DTMF tone. The DTMF tones sent during the
dialing sequence will be heard in the speaker.
DUTY
The Duty function is specifi c to paging operation. When
Duty mode is “ON” the user will hear all traffi c (specifi c
to sub audio signaling) on the paging channel. The paging
alert will sound when the programmed 2 Tone or 5 Tone
sub audio signal is received.
If Duty mode is “OFF”, normal radio traffi c is not heard
on the paging channel. The radio will only unmute and
sound the paging alert with the programmed 2 Tone or 5
Tone signal is received.
TRANSMIT BATTERY SAVER DISABLE
The Transmit Battery Saver helps extend battery life by
reducing transmit power when a very strong signal from
an apparently nearby station is being received. Caution
is advised when using this feature, as your transmission
power could degrade the audio heard by the receiving ra-
dios in your communication path.
Disabling the Transmit Battery saver by pressing (or press
and holding) the
PF
key is recommended if you are op-
erating in a location where high power is almost always
required.
Press again, (or press and hold again), the assigned
PF
key, the Transmit Battery Saver activates to reduce the
transmit power when a very strong signal from an appar-
ently nearby station is being received.
ADVANCED OPERATION
Exhibit 8: Operating Manual
FCC ID: AXI11374720
IC: 10239A-11374720
Vertex Standard LMR, Inc.