User's Manual

VX-261 Operating Manual
17
ta
(
talK around
)
scan
Press,(orpressandhold),theassigned
PF
keytotoggle
theTAScanfeature“On”and“Off”.
WhileTAScanisproceeding,thetransceiver willsearch
boththetransmitandreceivefrequencies.Whenasignal
is encountered on the receive frequency, the transceiver
will pause until the signal disappears. When a signal is
encountered on the transmit frequency,the transceiver
willcheckforactivityonthereceivefrequencyeveryfew
seconds (interval programmed by your Vertex Standard
dealer).
Note:TheTAScanfeaturedoesnotactivateontheSim-
plexChannel.
talK around
Press,(orpressandhold),theassigned
PF
keytoactivate
theTalkAroundfeaturewhenyouareoperatingonduplex
channel systems (separate receive and transmit frequen-
cies, utilizing a repeater” station). TheTalkAround
featureallowsyoutobypasstherepeaterstationandtalk
directlytoastationthatisnearby.Thisfeaturehasnoef-
fectwhenyouareoperatingon“simplex”channels,where
thereceiveandtransmitfrequenciesarealreadythesame.
Notethatyourdealermayhavemodeprovisionfor“Talk
Around” channelsby programming“repeater” and“Talk
Around”frequenciesontwoadjacentchannels.Ifso,the
key may be used for one of the other Pre-Programmed
Functions.
Note:The TalkAround feature does not activate on the
SimplexChannel.
reset
Press(orpressandhold)theassigned
PF
keytoresetthe
RFC(ReadyforCommunication)condition.
call 1 to call 3
Press,(orpressandhold),theassigned
PF
keytosenda
pre-programmedcallsignalofthe5-Tone.
sPeed dial
Your Vertex Standard dealer may have pre-programmed
Auto-Dialtelephonenumbermemoriesintoyourradio.
Todialanumber:
Press,(orpressandhold),theassigned
PF
keytosenda
pre-denedDTMFtone.TheDTMFtonessentduringthe
dialingsequencewillbeheardinthespeaker.
call
Press,(orpressandhold),theassigned
PF
keytosenda
pre-programmed 2-Tone encodecode or MDC1200
®
en-
codecode(ANIencodecode).
adVanced oPeration
FCC ID: AXI11284720
IC: 10239A-11284720
Vertex Standard LMR, Inc.