User's Manual

EVX-5300/-5400 OpErating Manual
24
adVancEd opEratIon
status up/Down
(
This function is only available in the
EVX-5400
)
Press (or press and hold) the assigned
PF
key to select a 5-tone status code from
the pre-dened status list.
status chEck
(
This function is only available in the
EVX-5400
)
Press (or press and hold) the assigned
PF
key to check the 5-tone receive status
code. When you press this key, the display will indicate the “Message” corre-
sponding to the receive status condition per the pre-dened status list.
Duty
Press (or press and hold) the assigned
PF
key to toggle the Duty function of the
2-tone/5-tone decoder “On” and “Off”.
When the Duty function is set to “On”, the user will always hear (depending on
the sub-audio signaling) all trafc on the paging channel. The radio will sound the
paging alert when it receives the programmed 2-tone/5-tone code.
When the Duty function is set to “Off”, the user will NOT hear normal radio traf-
c on the paging channel. The radio will sound the paging alert and unmute only
when it receives the programmed 2-tone/5-tone code.
iD chEck
(
This function is only available in the
EVX-5400
)
This function allows logged ID of the DTMF Signaling and 5-tone Signaling to be
reviewed and relayed (5-tone Signaling only) to a specic station:
r
Press (or press and hold) the assigned
PF
key to display the logged ID of the
DTMF Signaling and 5-tone Signaling.
r
Press the
[
P4
]
key to select the category (“DTMF Signaling” or “5-tone Sig-
naling”) to be reviewed, then press the
[

]
/
[

]
keys to select the ID.
r
Press the
[
P2
]
key to toggle the display between the “ID code display” and “Tag
display”.
r
Press the
[
P1
]
key to send the Call back, when recalling the ID of the “5-tone
Signaling”, if desired.
tX savE DisaBlE
Press (or press and hold) the assigned
PF
key to disable the Transmit Saver, if you
are operating in a location where high power is almost always needed.
The Transmit Saver reduces the transmit power when a very strong signal from an
apparently nearby station is being received.
FCC ID: AXI11144630
IC: 10239A-11144630
Vertex Standard LMR, Inc.