User's Manual
EVX-5300/-5400 OpErating Manual
21
talk arounD
Press (or press and hold) the assigned
PF
key to activate the Talk Around feature
when you are operating on duplex channel systems (separate receive and transmit
frequencies, utilizing a “repeater” station). The Talk Around feature allows you to
bypass the repeater station and talk directly to a station that is nearby. This feature
has no effect when you are operating on “simplex” channels, where the receive
and transmit frequencies are already the same.
In the
EVX-5300
, when the “TA” function is activated, the Transceiver Status In-
dicator (“
A
”, “
B
” or “
C
”) will illuminate, if the “Talk Around” status is assigned
to one of the Transceiver Status Indicator.
In the
EVX-5400
, when the “TA” function is activated, the “
” icon will be indi-
cated on the display.
Note that your Vertex Standard may have made provision for “Talk Around” chan-
nels by programming “repeater” and “Talk Around” frequencies on two adjacent
channels. If so, the key may be used for one of the other Pre-Programmed Func-
tions.
Note: The Talk Around feature does not activate on the Simplex Channel.
rEsEt
Press (or press and hold) the assigned
PF
key to reset the RFC (Ready for Com-
munication) condition.
call 1 to call 5
Press (or press and hold) the assigned
PF
key to send a 2-Tone or 5-Tone sequen-
tial burst which is pre-programmed.
coDE up/Down
(
This function is only available in the
EVX-5400
)
Press (or press and hold) the assigned
PF
key to select a 2-Tone or 5-Tone encode
code from the pre-programmed encode list.
adVancEd opEratIon
FCC ID: AXI11144630
IC: 10239A-11144630
Vertex Standard LMR, Inc.