User's Manual

EVX-5300/-5400 OpErating Manual
20
adVancEd opEratIon
scan sEt
Press (or press and hold) the assigned
PF
key to add/delete the current channel to/
from your scanning list.
In the
EVX-5300
, when you delete channel, the Transceiver Status Indicator
(“
A
”, “
B
” or “
C
”) will turn off, if the “SCAN CH” status is assigned to one of the
Transceiver Status Indicator. To restore a particular channel to your scanning list,
press (or press and hold) the assigned
PF
key again; the Transceiver Status Indica-
tor (“
A
”, “
B
” or “
C
”) will illuminates.
In the
EVX-5400
, when you delete channel, the display indicates “
-
SCN SKIP
-” briey and the “
” icon will disappear from the display. To restore a particular
channel to your scanning list, press (or press and hold) the assigned
PF
key again;
the display indicates “- SCN SET -” briey and “ ” icon will appear on the dis-
play.
Furthermore, press (or press and hold) the assigned
PF
key while the scanner is
paused, this removes the channel from the scan list temporarily.
group scan sEt
(
This function is only available in the
EVX-5400
)
You may wish to have the Scanner pass through more than one Group during the
scanning process (normally, scanning is performed within the current group only).
To include the current Group in the scanning loop, press (or press and hold) the
assigned programmable key (the “

” icon will appear on the display). To remove
a current Group from Group Scan, press (or press and hold) the assigned pro-
grammable key again (the “

” icon will disappear from the display).
ta scan
Press (or press and hold) the assigned
PF
key to toggle the TA (Talk Around) scan
feature “On” and “Off.”
While TA scan is enabled, the transceiver will search both the transmit and receive
frequencies (In the
EVX-5400
, the “
” icon will blink on the display). When a
signal is encountered on the receive frequency, the transceiver will pause until the
signal disappears (In the
EVX-5400
, “
” icon will appear but not blink). When
a signal is encountered on the transmit frequency, the transceiver will check for
activity on the receive frequency every few seconds (interval programmed by your
Vertex Standard dealer).
Note: The TA Scan feature does not activate on the Simplex Channel.
FCC ID: AXI11144630
IC: 10239A-11144630
Vertex Standard LMR, Inc.