User's Manual
EVX-5300 OpErating Manual 1
IntroductIon
The
EVX-5300
is full-featured Digital/Analog transceiver designed for exible
mobile and base station business communications in the VHF/UHF Land Mobile
bands. This transceiver designed for reliable business communications in a wide
variety of applications with a wide range of operating capability provided by their
leading-edge design.
The
EVX-5300
operates using the TDMA protocol for spectrum and power ef-
ciency and lower total equipment cost compared to FDMA. Digital eliminates
noise and static from voice transmit to only deliver the intended voice message
crisply and clearly. The
EVX-5300
feature the AMBE+2™ vocoder for enhanced
voice quality.
This transceiver allows up to 8 memory channels. Important channel frequency
data is stored in the ash memory on the CPU, and is easily programmable by a
Vertex Standard licensed dealers using a personal computer with Vertex Standard
Programming equipment
FIF-12
USB Programming Interface and
CT-104A
Con-
nection Cable for
FIF-12
and
CE142
Software. Or, once programmed, cloning
cable
CT-4
can be used to program portable to portable directly.
The pages which follow will detail the many advanced features provided in the
EVX-5300
Series transceiver. After reading this manual, you may wish to consult
with your Network Administrator regarding precise details of the conguration of
this equipment for use in your application.
For North American Users Regarding 406 MHz Guard Band
The U.S. Coast Guard and National Oceanographic and Atmospheric Ad-
ministration have requested the cooperation of the U.S. Federal Communi-
cations Commission in preserving the integrity of the protected frequency
range 406.0 to 406.1 MHz, which is reserved for use by distress beacons.
Do not attempt to program this apparatus, under any circumstances, for op-
eration in the frequency range 406.0 - 406.1 MHz if the apparatus is to be
used in or near North America.