User's Manual

Versus Technology, Inc.

Hardware and Wiring Installation Guide 37

4.10.1 Proper Wearing of the Versus Personnel Alert Badge

To ensure the sensors receive accurate, consistent signals, badges should

not be covered and should be worn as high up on the body as possible,

either on the collar or in the shoulder area. Make sure the signal is not

hidden from the sensors by clothing or obstacles.

4.10.2 Proper Mounting of the Versus Asset Tag

The Versus Asset Tag must be mounted on a flat, inflexible non-metal

surface. Mounting the tag

on metal will interfere with its RF performance, limiting the RF signal range. If a suitable non-

metal spot cannot be found for use with the tag, contact Versus Technology to discuss using a

mounting bracket with the tag. Mounting positions should be tested using the Frequencer before

all tags are applied.

The are where the tag is mounted should have a clear view of the IR sensors. The battery should

not be installed until after the tag has been affixed to the asset.

The tag should be mounted horizontally whenever

possible, so that its face is pointing toward the

sensors. If it cannot be mounted horizontally, it may

be mounted vertically so that the IR windows, two

clear areas at the top of the tag, are facing upwards.

DO NOT mount the tag with the IR windows facing

down or sideways.

Vertical Ali

nment

Horizontal Ali

nment