User's Manual

Versus Technology, Inc.
Hardware and Wiring Installation Guide 9
External Relay Board (VER-3015)
The external relay board controls up to 48 relay-controlled
devices, such as corridor lights, door locks, etc. Two External
Relay Boards can be connected to one Digital I/O Board.
Requires Digital I/O Board (VER-3010).
Perimeter Alarm Sentinel (PAS) (VER-3500)
The PAS unit is ideal for placement at ingress and egress points. The
PAS unit excites the Versus RF/PAS Asset tags to fire radio
frequency signals when within range of the unit (4' – 14'). The
signals are received by a nearby RF sensor and reported to the Versus
Information System or the facility’s access control system via a
Versus Wiegand Converter.
The PAS unit plugs into a 110V electrical outlet using a 14VAC power supply that is provided
with the unit. Used in combination with the RF/PAS Asset Tags (VER-1875) and RF sensors
(VER-4450).
Wiegand Converter (VER-3600)
The Wiegand Converter allows the user to connect Versus infrared (IR) and/or
radio frequency (RF) readers directly to any access control panel that accepts
2601 Wiegand readers. It converts the tag ID received from the Versus reader into
2601 Wiegand format and sends the tag ID to the access control panel’s Wiegand
reader port. The access control system can do whatever it can normally do with
the information, such as send alarms, etc.