User's Manual

Hardware and Wiring Installation Guide 9
4. Change the IP address of the server back to the
original
Ethernet Concentrator and Database
Server Manual, section 1.4
5. Connect the Concentrators to the Network Ethernet Concentrator and Database
Server Manual, section 1.5
6. Add the Concentrator Numbers to the Badge Server Ethernet Concentrator and Database
Server Manual, section 1.6
7. Install the Database Server Ethernet Concentrator and Database
Server Manual, section 2.1
8. Start the Database Server Ethernet Concentrator and Database
Server Manual, section 2.2.1
9. Configure the Database Server
a. On the Database tab in Preferences, check these
options:
1. Repair/Compact DB on Startup
2. But only if the server was improperly
shutdown
b. On the Options tab in Preferences, specify to
“Clear button presses if they haven’t been seen
for 5 seconds”.
Ethernet Concentrator and Database
Server Manual, section 2.2
10. Install Configuration Utilities on Server for database
configuration
Configuration Utilities Manual, section 2
11. Configure sensors and collectors in the Sensors and
Receivers Utility
a. Add room names
b. Add Collectors
c. Map Rooms to Collectors and Sensors, making
sure to note RF sensors in the Type column.
d. Test locations using Walking Setup
Configuration Utilities Manual
Section 3.1
Section 3.2
Section 3.3
Section 3.4
12. Add badge types in the Badge Types Utility
• Add patient, caregivers, wall badges, and any other
badge types needed.
Configuration Utilities Manual,
Section 7.1
13. Set up other Configuration Utilities as needed. Configuration Utilities Manual
14. Install client software on workstations. Individual client manuals
15. If the system includes RF sensors, test them using the
Frequencer (TCP/IP).
Hardware and Wiring Installation Guide
section 4.6
16. Create Backup
• Most important file to back up is the pdcs.mdb file
Configuration Utilities Manual, section
12.5
17. Verify system by checking off Punch-down Block
Organization List, Relay Light List, and
Communication Room checklist.
Hardware and Wiring Installation Guide
section 6